The GRINNELL G-FIRE Figure 705
Grooved Flexible Couplings, when properly installed, provide a dependable method of joining pipe, allowing for angular and linear deflection, thermal expansion and contraction, and
misalignments of the pipe.
Figure 705 couplings are rated at pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness when used in fire protection service

Approvals
UL and ULC Listed
FM Approved
VdS Approved
LPCB (Cert. Nos. 669a and 673a)

Refer to Table A for details
Sizes 1 to 12 Inch (DN25 to DN300)
Housing
Ductile Iron conforming to ASTM A536, Grade 65-45-12

Finish
• Orange, non-lead paint
• Red, non-lead paint
• Hot-dipped, Galvanized conforming to ASTM A153

Bolts/Nuts
• ANSI:
Carbon Steel oval neck track head bolts are heat-treated and conform to the physical properties of ASTM A183 Grade 2 and SAE J429 Grade 5 with a minimum tensile strength of 110,000 psi.
Carbon Steel heavy hex nuts conform to the physical properties of ASTM A183 Grade 2 and SAE J995 Grade 5. Bolts and nuts are zincelectroplated conforming to ASTM B633.
Stainless Steel Bolts and Nuts are available upon request.

• Metric:
Carbon Steel oval neck track head bolts (Gold color coded) are heattreated and conform to the physical properties of ASTM F568M with a minimum tensile strength of 760MPa.
Carbon Steel heavy hex nuts conform to the physical properties of ASTM A563 M Class 9. Bolts and nuts are zinc-electroplated conforming to ASTM B633

Gaskets
• Pre-lubricated Grade “A” EPDM, Violet color code, -30°F to 150°F (-34°C to 66°C)
For dry and freezer systems, lubrication is required. Refer to Installation
Manual IH-1000FP for details.

• Tri-Seal Grade “E” EPDM,
Green color code,
-30°F to 150°F (-34°C to 66°C)